ROBO-605 BIOS R1.02: delivery record

3 Eylül 2026

Historical parts record: Photos and notes below belong to this record. Confirm the offered unit’s full model, condition and available test evidence before ordering.

This record concerns one physical board filed as ROBO-605 BIOS R1.02, not a standalone firmware release. The supplier describes it as used, approximately 80% cosmetic condition, with a one-month warranty and a memory module and fan included. The first two photographs show the board assembly and its underside, where MADE IN TAIWAN is readable. A BIOS label is identification evidence, not proof of the firmware running in a powered system.

Identification and delivery details

The first photograph shows a green board with edge contacts, an installed upright memory module, a heatsink and fan, connectors, a rear bracket and labelled chips. The source designation includes BIOS R1.02, and a chip label is visible in this area. It does not establish a successful boot, the installed processor specification or memory capacity.

The second photograph shows the underside, component and solder features, edge contacts and a MADE IN TAIWAN marking. The hardware markings on this side are not substituted for the BIOS label. No exact board revision is assigned unless the complete marking can be confirmed; the photographed country marking refers to the board.

The source explicitly states one item and a weight of 1 kg, without a packed or bare-board weighing scope. The approximately 80% description is a supplier cosmetic grade, not a statement that 80% of service life remains. The one-month warranty applies as a recorded supplier term.

The record was created on 20 December 2025; its note does not give a separate delivery date. No boot log, memory test, fan test, watchdog result or system compatibility assessment is established by the two reviewed photos. The earlier summary’s firmware stability and IT/OT benefits are therefore not presented as demonstrated properties.

Photographed markings and delivery record
Item	Evidence
Source designation	ROBO-605 BIOS R1.02
Delivered form	Physical board assembly; not a firmware-only release
Recorded quantity	One item
Condition	Used; approximately 80% cosmetic grade according to supplier
Recorded accessories	Memory module and fan; both visible in photograph 1
Warranty	One month, according to source
Weight	1 kg; weighing scope unspecified
Board origin marking	MADE IN TAIWAN on reviewed underside
Record creation date	20 December 2025; separate delivery date not stated
Unverified configuration	Exact hardware revision, running BIOS, processor and memory capacity
Test evidence	No demonstrated boot, memory, fan or watchdog test

Swipe or scroll horizontally to read the full table.

The first photograph establishes the assembled board form; the second adds the readable underside origin marking. All eight source photographs and one video were downloaded and checked; the other six photographs retain neutral source captions. The video is preserved without a viewing or boot-test claim.

Matching this part

No exact ROBO-605 catalogue entry was found. A different board or a firmware item is not selected as a replacement link.

For an RFQ, provide clear board and BIOS labels, the required hardware revision, backplane and connector details, and the processor and memory requirements. Request the agreed accessory contents and a documented functional check appropriate to the intended system.