PG-X2: delivery record

11 Ağustos 2026

Historical parts record: Photos and notes below belong to this record. Confirm the offered unit’s full model, condition and available test evidence before ordering.

This PG-X2 board record includes a populated card with screw-terminal blocks, a grounding lead and a rear multi-pin connector. PG-X2 and MADE IN JAPAN are readable on the component side. The title adds 73600-A0153; that complete code still needs a clearer offered-unit photograph before a replacement is matched.

Identification and delivery details

The first view shows the rear connector marked 4CN, mounting holes and surface-mounted components. It provides a connector-side reference without a readable full model or manufacturer label.

The second view shows PG-X2 beside a terminal block and MADE IN JAPAN along the upper edge. Two terminal blocks, blue adjustable components and a green lead marked E are visible. A vertical CODE NO field is present, but the complete suffix is not sufficiently clear here to certify 73600-A0153 or equate it with A0151.

The dated note identifies Yaskawa, Japanese origin and one board described as new original. Those are source declarations. The reviewed views establish board markings and physical layout without an independent original-brand authentication, sealed packaging check or powered test.

The record dated 6 February 2026 gives 0.5 kg without identifying the weighing scope. It does not state a warranty term. The one-board historical note is separate from present availability and from the number of photographs.

The eight photographs and one clip document this source record. They do not establish supported drive models, encoder voltage, feedback signal format, parameter settings or a measured improvement in motion control. Any commissioning settings must follow the exact drive and option-card documentation.

Photographed markings and delivery record
Item	Evidence
Readable board model	PG-X2
Title code	73600-A0153; complete photographed suffix needs confirmation
Readable origin marking	MADE IN JAPAN
Source brand / grade	Yaskawa; described as new original, not independently authenticated
Historical quantity	One board in the dated source note; current availability unconfirmed
Connections visible	Two screw-terminal blocks; rear connector marked 4CN; green E-marked lead
Warranty / weight	Warranty unspecified; 0.5 kg, scope unspecified
Record date	6 February 2026

Swipe or scroll horizontally to read the full table.

The physical PG-X2 and Japan markings are distinguished from the note's Yaskawa/new-original declaration. The title's full board code is retained as a matching requirement, without substituting A0151 or a family-only listing.

Matching this part

Provide the installed drive's complete model, option-card markings and a clear CODE NO photograph. Confirm the full 73600-A0153 identity and compatible revision before ordering.

Specify the required encoder interface and supply, connector arrangement, mounting and sourcing grade. Request current board photographs, provenance, warranty terms and an agreed functional-test record.