FN60B-ZL DC Brushless Motor: Complete Guide for Industrial Automation and HVAC Applications

22 জানুয়ারী, 2026

Historical parts record: Photos and notes below belong to this record. Confirm the offered unit’s full model, condition and available test evidence before ordering.

The FN60B-ZL is a 50 W brushless DC motor running on a 310 V DC supply, rated 0.28 A at 1500 r/min, with an E-class 8-pole winding and IP24 protection. It is the kind of motor you find driving condenser or evaporator fans in air-conditioning and ventilation equipment, where the speed is set by a controller rather than by the supply frequency. This record covers one unit, brand new, received on 2026-01-19, weighing 2 kg, with a 1-month warranty.

What the nameplate says

Everything below is printed on the aluminum nameplate wrapped around the housing — no guesswork needed:

Item	Value on nameplate
Model	FN60B-ZL
Frame / series marking	ZWR50-F
Type	BRUSHLESS DC MOTOR (无刷直流电动机)
Supply	DC310V
Output / current	50 W, 0.28 A
Speed	1500 r/min
Insulation / poles	E class, 8P
Ingress protection	IP24
Origin	MADE IN CHINA

The nameplate also carries the CCC mark, a RoHS marking, a "Q. C. Pass" inspection stamp, a QR code with the serial Z000116110821441, and the production codes F25040801 / 15013069. A warranty seal reading "撕毁无效" (void if torn), dated February 2024, is stuck across the end bell — still intact on this unit.

FN60B-ZL brushless DC motor, overall view — Overall view: white painted housing, single stainless-look output shaft on top, lead wires exiting the same end through a black sleeve.

Wiring and speed control

The motor terminates in a single 6-position connector carrying five leads. The nameplate wiring diagram maps them like this:

Wire	Color	Function
RD	Red	Vcc (supply)
BK	Black	GND
WH	White	Vcc (second supply pin)
YE	Yellow	Vsp (speed control input)
BU	Blue	FG (speed feedback / tach)

Plus an E terminal for protective earth on the housing side. With a Vsp pin, the host controller sets motor speed with an analog voltage or PWM — that is how HVAC boards trim fan speed instead of switching it in steps. The FG lead lets the controller read actual rotation back, useful for stall detection.

FN60B-ZL white 6-position connector with five leads — The connector up close: white 6-position housing, five leads in red, blue, yellow, white and black.

FN60B-ZL connector back side with latch — Back of the connector showing the pink latch clips that hold the contacts in place.

FN60B-ZL shaft end and rubber isolation base — Shaft end: smooth bright shaft, and the black rubber base under the motor is ribbed to damp vibration into the fan bracket.

FN60B-ZL connector side view — Connector from the side; lead wires exit through a black 105 °C-rated PVC sleeve.

Nameplate close-ups

FN60B-ZL nameplate full view with QR code — Nameplate full view with the QR serial code Z000116110821441 and the Q.C. Pass stamp.

FN60B-ZL nameplate ratings close-up — Ratings block close-up: ZWR50-F frame, FN60B-ZL, DC310V, 50 W 0.28 A, 1500 r/min, E 8P IP24, with the five-lead wiring diagram and MADE IN CHINA.

FN60B-ZL motor side with warranty seal — Opposite side: the "撕毁无效" (void if torn) warranty seal dated 2024/02 is unbroken.

Connector details

FN60B-ZL connector six cavities — Deep view into the connector: six cavities molded, five populated.

FN60B-ZL shaft and connector another angle — Another angle of the shaft and lead exit, showing the lead colors clearly: red, black, yellow, white, blue.

Video: the motor rotating slowly on the bench, shaft and lead dressing visible from multiple angles.

FN60B-ZL motor from the mounting base side — From the mounting-base side: ribbed rubber isolator centered under the housing, shaft and connector on the far end.

Condition and delivery facts

One motor, brand new and unmounted — the warranty seal, nameplate and paint show no handling marks. Received into stock on 2026-01-19; packed weight is 2 kg. Warranty is 1 month from delivery. The lead length is long enough to dress the connector away from the fan housing; measure before you order if your harness is short.

Related records

If your project mixes motor types, two earlier delivery records are worth a look: the ZD 4IK25RGN-C 25 W AC motor with 100:1 gear head covers the induction-motor side, and the Panasonic MSMD041G1S 400 W servo motor covers positioning duty where closed-loop control matters.

Need FN60B-ZL motors or a cross-reference for your HVAC board? Send us the model and quantity — we reply with stock, photos and lead time.

Request a quote