RLX2-IHNF-A: delivery record
On this page
The source file dated 11 July 2025 names ProSoft RLX2-IHNF-A and states a 10–24VDC supply. The reviewed front panel is marked ProSoft Technology, RadioLinx, 802.11abgn Fast Industrial Hotspot and RLX2-IHNF, with 10–24 VDC printed along the lower edge. The -A suffix is not confirmed by the first two front views and remains part of the source designation.
Identification and delivery details
The front has three antenna fittings labelled ANT C, ANT B and ANT A, a signal-strength scale, and indicator labels for power, RF transmit, RF receive, serial, Ethernet, NET and MOD. ETHERNET and RS-232 are also printed at the lower edge. These are visible labels, not evidence that every port, radio mode or indicator has been functionally tested.
Both photographs show the same front identification and surface marks. They do not establish new or used supply grade, firmware revision, accessories, antenna inclusion or a manufacturing country. The note does not state warranty duration or an explicit quantity. Its zero weight field is not treated as a physical weight.
The previous descriptive summary claimed 300 Mbps, dual-band operation and 2x2 MIMO. The reviewed panel and source note do not provide a speed test or the detailed configuration needed to confirm those claims for the recorded item. No Rockwell or SCADA installation, network security setting or equipment compatibility is demonstrated by these views.
| Item | Evidence |
|---|---|
| Source designation | RLX2-IHNF-A |
| Photographed front model | RLX2-IHNF; -A suffix not established |
| Visible manufacturer / family | ProSoft Technology; RadioLinx |
| Printed category | 802.11abgn Fast Industrial Hotspot |
| Supply marking | 10–24 VDC, consistent with source note |
| Visible interface labels | ETHERNET, RS-232; ANT A, ANT B, ANT C |
| Record date | 11 July 2025 |
| Quantity / condition / warranty | Not explicitly stated in the source note |
| Weight | No usable weight value; source field is zero |
| Unverified configuration | Suffix, firmware, detailed radio configuration, throughput and accessories |
Swipe or scroll horizontally to read the full table.
The first two photographs were reviewed. All six JPEG photographs and the MOV source clip were downloaded and checked, with original filenames retained in the mapping. The other four photographs have neutral source captions; the clip is preserved without a viewing or network-test claim.
Matching this part
The sole catalogue result describes a Profibus communication module. That category does not match the photographed RadioLinx industrial hotspot, so no product link is used despite the similar model string.
For an RFQ, provide the full unit label including any suffix, the firmware and regulatory information if available, the intended network role and required accessories. Confirm the exact model and supported configuration from its applicable documentation before using it as a replacement.
Photos and recorded media
Recorded inspection clip. The clip is retained as delivery evidence; no performance measurement is inferred from it.
Related records and products
Use Contact KOEED to clarify the full hotspot suffix or request a RadioLinx quotation with the complete unit label.
Request this part
Send the full unit label, network requirement and accessory list with your request.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
