LC1F185M7: delivery record

The Schneider Electric LC1F185M7 record shows a TeSys contactor with three marked power paths: 1/L1 to 2/T1, 3/L2 to 4/T2 and 5/L3 to 6/T3. The box identifies LC1F185M7, while the front of the contactor reads LC1F185. The suffix remains important when confirming the exact control-coil variant.

Identification and delivery details

The source record was created on April 9, 2025 and contains a Schneider tag and a 5 kg weight entry. It supplies no dated shipment quantity, condition or warranty term. The box's x1 marking is packaging quantity and should not be turned into a transaction count.

The first photograph shows box entries 220 V 50/60 Hz, 90 kW–380 V and Made in France. These are packaging statements. The second confirms the LC1F185 front marking, six main terminals, printed instructions and a bag of fastening hardware; it does not expose a readable coil or full side rating plate.

The retained title says 180 A, while the source description says 185 A/100 kW. Neither current value is confirmed by the first two photographs, and the 100 kW description cannot be substituted for the box's explicitly voltage-linked 90 kW–380 V entry. The required utilization category and operating voltage must be established from the exact rating documentation.

No network interface, predictive-maintenance function or operating-cycle data is documented for this contactor. Any machine-level monitoring arrangement would need separate equipment and evidence.

Swipe or scroll horizontally to read the full table.

Photographs 1 and 2 were reviewed. Six further JPEG files are retained without individual visual review; no video is listed. The record contains no measured contact-resistance, coil-operation or endurance result.

Matching this part

Compare the complete LC1F185M7 reference, actual coil label, terminal arrangement and mounting dimensions with the removed contactor. Confirm the supplied fastening hardware and any auxiliary contacts separately.

Choose the main-contact rating by utilization category, motor voltage and duty. Keep coil voltage separate from the switched power circuit, and resolve the title/description current discrepancy against the exact manufacturer documentation.

Photos and recorded media

Related records and products

The LC1F265M7 record documents a separate larger contactor reference. A shared TeSys family does not establish interchangeability. Send the installed coil and rating labels through Contact us.