NCEB-LCN: delivery record

22 জুলাই, 2026

Historical parts record: Photos and notes below belong to this record. Confirm the offered unit’s full model, condition and available test evidence before ordering.

This archive is filed under Sun Hydraulics NCEB-LCN and dated 26 July 2025. The first two reviewed photographs show two long white cartons marked SUN HYDRAULICS, NCEBLCN and MADE IN CHINA. They do not expose the valve or demonstrate flow-control performance.

Identification and delivery details

The first photograph shows the labelled cartons on a wooden surface. NCEBLCN is printed without the source name's hyphen. The torque line reads TRQ 45–50 Lbf Ft / 61–68 Nm. That is packaging text, not a record of installation torque applied to a valve.

The second photograph shows the same carton arrangement and label wording. It adds no readable cartridge engraving, adjustment mechanism or seal view. Review stops after this second image; the remaining photographs are retained without visual claims.

The written source identifies Sun Hydraulics and gives a 0.7kg weight field. It does not separately state shipment quantity, condition or warranty. Two cartons in a frame do not establish two supplied valves or current inventory. Procurement information is excluded from the article.

The catalogue entry uses the complete NCEB-LCN model and describes a new fully adjustable needle valve. Its new-condition wording belongs to that offer, since the dated archive does not state condition. No additional suffix, revision or package quantity is inferred.

The older 12gpm, 5000psi, T-5A cavity and reverse-check claims are not established by these reviewed cartons. Confirm the actual engraved model, cavity drawing and application data with the supplier before using this record for a replacement.

Photographed markings and delivery record
Item	Evidence
Source identifier	Sun Hydraulics NCEB-LCN
Observed carton code	NCEBLCN
Observed origin marking	MADE IN CHINA
Observed torque wording	45–50 lbf ft / 61–68 Nm, on carton
Archive date	26 July 2025
Weight	0.7kg field; basis unspecified
Quantity / condition / warranty	Not separately stated in source
Reviewed evidence limit	Cartons only; no exposed valve or test

Swipe or scroll horizontally to read the full table.

All seven unique JPEG photographs and one MOV video completed GET and byte/SHA-256 checks before photographs 1 and 2 were reviewed. Photographs 3 through 7 remain neutrally captioned. The video is preserved as source media without a functional-test claim.

Matching this part

Request a readable NCEB-LCN engraving on the actual offered cartridge and confirm the cavity, seals and adjustment arrangement using its correct technical documentation.

Confirm quantity, condition and warranty for the new offer. Do not use carton count or the catalogue's new-condition wording to rewrite this historical shipment entry.

Photos and recorded media

Reviewed photograph 1: two white SUN HYDRAULICS cartons marked NCEBLCN and MADE IN CHINA, with a printed torque line.

Reviewed photograph 2: the same labelled carton arrangement; no valve or cartridge engraving is exposed.

Source-record photograph 3 filed under NCEB-LCN.

Source-record photograph 4 filed under NCEB-LCN.

Source-record photograph 5 filed under NCEB-LCN.

Source-record photograph 6 filed under NCEB-LCN.

Source-record photograph 7 filed under NCEB-LCN.

Recorded inspection clip. The clip is retained as delivery evidence; no performance measurement is inferred from it.

View the new Sun Hydraulics NCEB-LCN Fully adjustable needle valve catalogue listing. Confirm the exact configuration and condition; a catalogue entry does not identify this delivered unit. The NCS-304-P record documents a connector, a different component category. Contact Koeed for valve identification evidence.