SICK IM08-06NPS-ZT1 Inductive Proximity Sensor: Complete Technical Guide
On this page
Ten new SICK IM08-06NPS-ZT1 inductive sensors are documented in this delivery record of 1 December 2025. The clear bag label identifies article 6027508, Made in Hungary, a nominal 6 mm range, PNP output, DC 10–30 V and Ia 200 mA. The group photographs show ten slim metal sensors with blue sensing ends and mounting hardware, individually bagged.
Identification and delivery details
One group view shows the sensor bodies through the reverse of the bags; a second shows the printed labels facing upward. The close-ups reveal a threaded metal barrel, a short connector end and separately packed hex nuts and toothed lock washers. SICK printing is visible on the smooth rear section of a sensor.
The packaging's PNP diagram labels brown as L+, black as Q and blue as M, with the load between Q and M. It also carries Class 2, CE, a double-square symbol and cULus Listed wording. An installation drawing is printed beside the wiring diagram, and the NFPA79 note directs the reader to the applicable datasheet for field-wiring adapters. These printed details are retained as evidence, without claiming that the photographs demonstrate electrical performance.
| Item | Evidence |
|---|---|
| Full type | IM08-06NPS-ZT1 |
| Article number | 6027508 |
| Printed nominal range | Sn = 6 mm |
| Supply and current | DC 10–30 V; Class 2; Ia = 200 mA |
| Printed output diagram | PNP; bn L+, bk Q, bu M; load between Q and M |
| Visible construction | Slim threaded metal barrel; blue sensing end; connector at rear; nuts and toothed washers |
| Origin marking | Made in Hungary |
| Marks and packaging note | CE; cULus Listed; NFPA79 field-wiring adapter note; bag print NP0931 |
| Delivery details | 10 units described as new; 1 December 2025; recorded weight 0.5 kg |
Swipe or scroll horizontally to read the full table.
Source: the actual SICK bag labels and sensor photographs below, together with the dated delivery record. No distance calibration, powered input/output test or ingress test is supplied in this record.
Matching this part
Use the complete -ZT1 suffix and article 6027508 when comparing a replacement. Similar IM08 listings can use other suffixes; check the offered connector and wiring against the existing machine, rather than using the barrel appearance alone.
The package diagram is useful for confirming the PNP circuit. Installation clearances and the usable gap should come from the instructions for the exact offered variant and target material. A supplier should also confirm the current lot's condition and accessories.
Photos and recorded media
Recorded inspection clip. The clip is retained as delivery evidence; no performance measurement is inferred from it.
Related records and products
For other sensor circuits in this batch, see the IFS204 three-wire record and II5737 two-wire record. The storefront lists the IM08-06NPS-ZT1 variant; request current identity photos before ordering.
Request this part
Send IM08-06NPS-ZT1 / 6027508, quantity and photos of the existing sensor and connector. We can confirm the offered suffix, condition and included mounting hardware.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
