1PCS XIANGYU GROUP Fan XY-12038B2H 110-240V 12CM EC-FAN 2 wire cooling fan

XIANGYU GROUP · COOLING FAN · IN STOCK

What Is the 1PCS XIANGYU GROUP Fan XY-12038B2H 110-240V 12CM EC-FAN 2 wire cooling fan?

When your equipment needs a reliable replacement or spare cooling fan, the 1PCS XIANGYU GROUP Fan XY-12038B2H 110-240V 12CM EC-FAN 2 wire cooling fan manufactured by XIANGYU GROUP is built to match or exceed the performance of the original component. It is a KOEED-supplied part suitable for equipment maintenance, repair, and OEM production.

In short: A manufactured by XIANGYU GROUP cooling fan that delivers consistent, reliable performance for equipment maintenance, system integration, and OEM builds — available now with fast global delivery.

Key Features and What They Mean

1. Optimized Blade Aerodynamics

What it means: The fan impeller uses computational fluid dynamics (CFD)-optimized blade geometry — curved, swept, or notched designs that maximize airflow per watt while minimizing tonal noise and blade-pass frequency harmonics.
Why it matters: Poorly designed fan blades waste energy as turbulence and noise rather than useful airflow. An optimized blade moves more air at lower RPM for the same noise level, or significantly more air at the same RPM. In dense electronic enclosures where every CFM matters, blade efficiency directly impacts component temperatures.
Result: Lower operating temperatures for your equipment, reduced energy consumption, and a quieter operating environment. Equipment that runs cooler lasts longer — every 10 degree C reduction roughly doubles component life.

2. Dual Ball Bearing System

What it means: The rotor is supported by precision ball bearings rather than sleeve bearings, providing lower friction, higher load capacity, and drastically longer service life — typically 60,000 to 100,000+ hours L10 at rated temperature.
Why it matters: Sleeve bearings rely on a thin oil film that eventually breaks down, especially at elevated temperatures. When the lubricant fails, the bearing runs dry, noise increases, and the fan seizes — usually at the worst possible moment. Ball bearings maintain consistent performance across the full temperature range and can be mounted in any orientation without oil migration.
Result: Install-and-forget reliability for mission-critical equipment. No scheduled fan replacement, no bearing noise creep over time, and consistent cooling performance across years of 24/7 operation.

Key Specifications

For detailed specifications, dimensional drawings, and full datasheets, please refer to the manufacturer's official documentation or contact us. Available technical documents can be provided digitally at no additional cost.

Typical Applications

• Electronics Enclosure Cooling: PLC cabinets, server racks, telecom shelters, and control panels — forced-air cooling for enclosed electronics that generate significant heat during operation.
• Refrigeration and HVAC: Condenser fans in commercial refrigerators, freezers, and air conditioning units — continuous-duty fans that must operate reliably for years in varying ambient temperatures.
• Industrial Automation Panels: VFD enclosures, motor control centers, and power distribution cabinets — cooling for high-power semiconductor devices that would overheat without active airflow.
• 3D Printer and CNC Machine Cooling: Hot-end cooling, part cooling, and electronics bay ventilation — compact high-speed fans that provide directed airflow in tight spaces.
• LED Display and Signage Cooling: Outdoor LED billboards, digital signage, and stage lighting fixtures — cooling for densely-packed LED arrays that generate concentrated heat.
• Medical and Laboratory Equipment: Analyzers, incubators, and diagnostic instruments — reliable low-noise cooling for sensitive equipment where fan failure could compromise test results.

Frequently Asked Questions

Can I run this fan at a lower voltage to reduce speed and noise?

Most DC fans will start and run at voltages below their rating, but with reduced airflow. A 12V fan may start at 5-7V and run proportionally slower. However, running below the minimum start voltage can cause the fan to stall, overheat, and fail. For reliable variable-speed operation, use a fan with PWM speed control input (4-wire) and a proper PWM controller.

How do I clean and maintain a cooling fan?

Power down the equipment. Use compressed air to blow dust from the blades and hub area. For heavy buildup, use a soft brush followed by compressed air. Do not use liquid cleaners that can penetrate the bearing seals. Check that the fan spins freely by hand — any resistance or grinding noise indicates bearing wear. In dusty environments, install a fan filter and clean it regularly to extend fan life.

The fan in my equipment stopped spinning — is it the fan or the power supply?

First, measure the voltage at the fan connector with a multimeter — it should match the fan rating (5V, 12V, 24V, 110V, or 220V). If voltage is present but the fan does not spin, the fan has failed. If no voltage is present, the problem is upstream (power supply, fuse, control board). Also check for obstructions — a jammed blade can cause the fan to draw excess current and blow a fuse.

koeed.com — Your Trusted PLC Supplier. Industrial electronics, automation components, and specialty parts. Worldwide shipping with 24-hour quote turnaround at Moritta@KOEED.COM.