Allen-Bradley 20F11ND022AA0NNNNN PowerFlex 753 AC Drive — Factory Sealed

AB · PowerFlex 753 · 22A · 480V 3-Phase · Normal Duty · Factory Sealed

The 20F11ND022AA0NNNNN is a factory-sealed Allen-Bradley PowerFlex 753 AC drive rated 22A continuous output (15 HP / 11 kW) at 480V three-phase, in the normal-duty rating class. It belongs to Rockwell Automation's PowerFlex 753 family, the workhorse low-voltage drive for mid-range factory automation where EtherNet/IP integration, sensorless vector control, and slot-based I/O expansion are baseline requirements. KOEED keeps the unit in stock as part of the broader Allen-Bradley PowerFlex drives lineup, and the same 753 platform is also stocked in higher-current codes for the 30 HP to 100 HP range.

The catalog suffix 11 indicates 480V AC input with a common DC bus option, the N denotes normal-duty, the D character confirms 480V 3-phase, 022 specifies 22A continuous output, AA0 means the drive is shipped without a Human Interface Module (HIM), and the trailing NNNNN indicates no factory-fit communication option — communication cards are ordered separately and installed in the drive's expansion slot. The unit is brand new in the original Rockwell carton, factory sealed, with full traceable packaging and date code, and ships with a fresh firmware image and the standard accessories bag.

Key Technical Specifications & Overview

The following ledger table summarizes the catalog decoding for the 20F11ND022AA0NNNNN drive. All values are taken from the Rockwell PowerFlex 753 selection guide for the frame 2 / 480V normal-duty class.

Application Scenarios & Where It Fits

The PowerFlex 753 is one of the most widely-deployed industrial drives in North American heavy industry, and the 22A 480V rating is the sweet spot for motor loads in the 10–15 HP range. Typical deployments include:

• Pumps and water / wastewater treatment — lift stations, booster pumps, clarifier drives
• Fans and blowers — induced-draft and forced-draft fans, scrubber fans
• Conveyors and material handling on factory automation lines
• Mixers, agitators, and extruders in process and food & beverage plants
• Machine tool spindles and auxiliary axes
• Hoists, cranes, and winches in mining, metals, and port logistics
• HVAC chiller and cooling-tower drives in commercial and industrial buildings
• Mining crushers, mills, and reclaim feeders

Integration & Wiring Notes

When integrating the 20F11ND022AA0NNNNN into a control panel or a Logix-based system, plan around the slot-based expansion model. Key wiring and integration points:

• Power wiring: 3-phase 480V AC input on the L1/L2/L3 terminals at the bottom of the drive; motor U/V/W on the output side. Use copper conductors sized per the NEC and the drive's frame-2 current rating, and provide a means of disconnect within sight of the drive per local code.
• DC bus: The 11 prefix on the catalog code confirms the drive is built for common-bus operation, sharing a DC link between multiple PowerFlex 753 units to reduce line-side harmonics and recover regenerative energy from overhauling loads.
• Control terminals: TB1 on the front face accepts the standard analog/digital I/O — 0-10V or 4-20mA reference, digital inputs (start / stop / reverse), relay outputs, and a +24V supply for external sensors.
• Safety: Add a 20-750-S safety card to the slot for safe-torque-off (STO) and cascaded safety functions. The base drive is shipped without a safety option and is not suitable for SIL-rated applications out of the box.
• Communication: Pair with a 20-750-ENETR EtherNet/IP card to land the drive natively on a Logix backplane. With Studio 5000 and the AOI library, tag-based control is straight-forward and the drive appears as a native module in the controller I/O tree.
• Programming: Use Connected Components Workbench (CCW) for standalone commissioning, or import the drive into Studio 5000 Logix Designer as a Logix add-on profile for full integration with ControlLogix or CompactLogix controllers.

Installation & Commissioning Tips

PowerFlex 753 drives in the 22A 480V class are frame-2, and the cabinet layout, cooling, and grounding determine whether the drive runs for ten years or fails in eighteen months. Field tips from our sourcing engineers:

• Mounting clearance: Keep 100 mm above and 50 mm below the drive for vertical airflow. In an enclosure, derate the drive at 1% per °C above 40 °C ambient, and add a fan or air-conditioner if the cabinet sits in a switchroom or outdoors.
• Grounding: Run a dedicated PE conductor back to a clean ground bus; do not daisy-chain grounds between drives. Use shielded motor cable with the shield bonded at both ends for VFD applications to reduce bearing currents and radiated noise.
• Line reactors and EMC: For installations with weak utility power or long motor leads (>30 m), fit a line reactor on the input side and a dV/dt filter on the output side. This is the difference between a quiet drive and one that trips on overcurrent at startup.
• Firmware: Before commissioning, check the drive's firmware revision against the Connected Components Workbench release notes. Out-of-the-box firmware sometimes lags the latest bug fixes, and a flash takes 10 minutes.
• Auto-tune: Run a static and a rotating auto-tune for vector-control applications. Without auto-tune, sensorless vector mode can deliver rough low-speed performance on a no-load motor.
• Spare card: Order a spare HIM (20-HIM-A6) and one spare communication card to keep on the shelf. A failed HIM during commissioning can halt a startup; the spare is cheap insurance.

Procurement, Warranty & Lead Time

As an independent multi-brand industrial-automation distributor (not a Rockwell subsidiary), KOEED sources the 20F11ND022AA0NNNNN through authorized and traceable channels. Every unit we ship is factory sealed in the original Rockwell carton with a date code and a verifiable lot number — we do not sell refurbished or pulls under the "factory sealed" tag. Our China Sourcing Company team can also broker large multi-line builds for OEM customers that want a single shipping manifest.

Lead time: typically 3–7 business days for in-stock units, and 4–6 weeks for large-quantity builds. We support full BOM quotation — send the entire bill of materials including any 20-750-ENETR, 20-750-S, 20-HIM-A6, 1606-XL power supplies, and Logix processors, and we will quote the lot as a single line item. If your project also needs drives or motion from Siemens, Mitsubishi, Omron, Fanuc, Schneider, Yaskawa, Panasonic or KEYENCE, send the lot together to Moritta@KOEED.COM and we will quote it all.

Warranty: 12-month limited warranty on the drive against manufacturing defects. Warranty does not cover miswiring, environmental damage, or operation outside the published spec. KOEED can also broker an extended warranty through third-party providers if your end-user requires 24 or 36 months.

Related Drives & Cross-Reference

Browse the full KOEED multi-brand catalog: Allen-Bradley · Siemens · Mitsubishi · Omron · Fanuc · Schneider · Yaskawa · Panasonic · KEYENCE. Or send a full BOM to Moritta@KOEED.COM for a same-day quote.

More help: About KOEED · About our China Sourcing Company · Contact us · Create a Quote · KOEED Home