HAWE Hydraulik Filter Element 6905117F3 — Replacement Insert for 6905-Series In-Line Filters

Hydraulic Filtration Spare · Industrial Press / Clamp / Injection Moulding Machines

The HAWE 6905117F3 is a replacement filter element (cartridge) for the HAWE Hydraulik 6905-series in-line hydraulic filter. HAWE is a German hydraulics manufacturer best known for directional control valves, piston pumps, and high-pressure manifolds used in press lines, die-casting cells, injection moulding machines, and mobile hydraulics. The 6905-series filter is a typical return-line or pressure-line element that protects proportional valves and servo valves from particulate contamination, and the 6905117F3 is the consumable insert that is replaced on a planned service interval.

At koeed.com we list 6905117F3 as a fluid-power consumable. Element swaps are typically tracked by hour-meter on the press or by differential-pressure gauge across the filter housing, and the replacement is normally bundled into a quarterly PM kit alongside seals, oil samples, and proportional-valve diagnostics.

Key Specifications

Datasheet Highlights

• Direct OEM replacement for the 6905-series filter housing — drop-in fit, no adapter required.
• Glass-fibre media delivers a stable β-ratio across the element life, which is critical for NAS 7 / ISO 4406 18/16/13 cleanliness targets on servo-valve circuits.
• Metal end-caps and a robust centre tube allow the element to withstand cold-start pressure spikes without media migration.
• Seal material is selected at order time — NBR is standard for mineral oil; FKM is required for ester-based or high-temperature fluids.
• Replacing the element (and bleeding the housing) restores nominal Δp across the filter, so proportional-valve response and clamp-pressure repeatability are returned to baseline.
• Used elements are drained, sealed in a leak-proof bag, and disposed of as oil-contaminated waste per local environmental rules.

Typical Applications

• Hydraulic presses: stamping, drawing, and forming presses where return-line filtration protects proportional pressure valves and clamp cylinders.
• Injection moulding machines: return-line or pressure-line filtration on machines using HAWE proportional valves for clamp tonnage and ejector control.
• Die-casting cells: high-pressure filter on the locking / injection hydraulic circuit, where cleanliness directly affects shot repeatability.
• Mobile hydraulics: load-sensing pumps on agricultural or construction equipment where a clogged element triggers a Δp alarm into the cab controller.
• Test rigs & lab stands: HAWE hydraulic test rigs used to qualify proportional valves, where element changes are scheduled between test campaigns.
• Steel mill hydraulics: roll-balance and gap-control circuits on cold-rolling mills, where filtration is the difference between a clean shift and a servo-valve trim rebuild.

Related Modules & Cross-Reference

An element swap is the cheapest PM in any hydraulic PM cycle — but it is usually scheduled alongside other control, HMI, and I/O work on the same machine. KOEED can ship the filter with a wider maintenance kit:

Browse the KOEED hydraulics & filtration and spares & consumables collections to bundle a full hydraulic-PM kit.

Warranty & Authenticity

The 6905117F3 is a brand-new, factory-sealed HAWE Hydraulik replacement element. KOEED sources from authorised German distribution channels, and each element is shipped in its original HAWE box with batch code and conformity documentation. Non-conforming elements are replaced from EU/US bonded stock at no charge; counterfeits are a known risk in this category and we document the supply chain end-to-end.

Cross-reference: 6905117F3 · HAWE 6905-series filter element · hydraulic replacement cartridge · 6905-117-F3 · B2B industrial automation spares. KOEED Automation — independent distributor of industrial automation spare parts, including Allen-Bradley, Siemens, Mitsubishi, Omron, Schneider Electric, FANUC, Yaskawa, Panasonic, and Keyence.