KLÜBER to Mobil Open Gear Lubricant Cross-Reference Table
| KLÜBER Product | Equivalent Product | Compatibility & Notes |
| GRAFLOSCON A-G Ultra | Mobilgear OGL 007 | Semi-fluid adhesive greases with solid lubricants. GRAFLOSCON uses synthetic base + graphite/MoS₂. |
| GRAFLOSCON C-SG Ultra | Mobilgear OGL 009 | Synthetic sprayable greases. GRAFLOSCON C-SG Ultra for highest-demand open gear applications. |
| Klüberfluid C-F 3 Ultra | Mobilgear OGL 007 | High-viscosity synthetic fluid with MoS₂ and graphite for automatic spray systems on large mill gears. |
| Klüberfluid D-F 1 Ultra | Mobilgear OGL 461 | Lower-viscosity sprayable fluid for medium and small open gear drives. Verify coverage requirements. |
Reference: Published product datasheets from KLÜBER Lubrication and Mobil. Verify with current datasheets before substitution.
⚠ Important Disclaimer
This cross-reference is provided for informational purposes only. Equivalent does not mean identical — differences in thickener type, base oil viscosity, additive packages, and NLGI grade can affect performance. Always verify technical compatibility by consulting both manufacturers' datasheets and obtaining OEM approval before substituting lubricants. Contact KOEED for verified KLÜBER product recommendations matched to your specific application requirements.
> Tip
When cross-referencing, always verify: (1) thickener compatibility — mixing incompatible thickeners can cause grease to soften or harden, (2) base oil viscosity at operating temperature, (3) NLGI grade for proper consistency, (4) certification status (NSF H1, ISO 21469) for food-grade applications. If in doubt, contact KOEED for a verified recommendation.
Frequently Asked Questions
Q: What's the difference between GRAFLOSCON A-G and C-SG?
GRAFLOSCON A-G Ultra is a semi-fluid adhesive grease with graphite solid lubricants designed for standard grinding mill and kiln open gears. GRAFLOSCON C-SG Ultra is a fully synthetic sprayable grease with a special solid lubricant package for the highest demands — higher loads, wider temperature range, and extended service intervals compared to the A-G series.