KLÜBER to Mobil Food-Grade (NSF H1) Cross-Reference Table
| KLÜBER Product | Equivalent Product | Compatibility & Notes |
| Klüberfood NH1 94-301 | Mobilgrease FM 222 | Both NSF H1, aluminum complex PAO greases. KLÜBER adds ISO 21469 + Kosher/Halal. |
| Klubersynth UH1 6-100 | Mobil SHC Cibus 32 | Both NSF H1 synthetic oils. Different viscosity grades and base oil technology (PAO vs proprietary synthetic). |
| Klubersynth UH1 14-1600 | Mobil SHC Cibus 1000 | High-viscosity food-grade oils. UH1 14-1600 is PAO; SHC Cibus is proprietary synthetic. Verify chain/conveyor specs. |
| Klubersynth GH 6-220 | Mobil SHC Cibus 220 | GH 6 is NOT food-grade. For food-grade gear oils, use Klubersynth UH1 6-460 instead. |
| Klubersynth CH 2-100 | Mobil SHC Cibus 46 | Both NSF H1 hydraulic oils. Verify viscosity, pump type, and system cleanliness requirements. |
| Kluberpaste UH1 96-402 | Mobilgrease FM 005 | Both NSF H1 assembly products. Different consistency (paste vs grease). Verify application method. |
Reference: Published product datasheets from KLÜBER Lubrication and Mobil. Verify with current datasheets before substitution.
⚠ Important Disclaimer
This cross-reference is provided for informational purposes only. Equivalent does not mean identical — differences in thickener type, base oil viscosity, additive packages, and NLGI grade can affect performance. Always verify technical compatibility by consulting both manufacturers' datasheets and obtaining OEM approval before substituting lubricants. Contact KOEED for verified KLÜBER product recommendations matched to your specific application requirements.
> Tip
When cross-referencing, always verify: (1) thickener compatibility — mixing incompatible thickeners can cause grease to soften or harden, (2) base oil viscosity at operating temperature, (3) NLGI grade for proper consistency, (4) certification status (NSF H1, ISO 21469) for food-grade applications. If in doubt, contact KOEED for a verified recommendation.
Frequently Asked Questions
Q: Is Mobil SHC Cibus a direct replacement for Klubersynth UH1?
Both are NSF H1 registered synthetic oils suitable for food processing, but they use different synthetic base oil technologies. Viscosity grades do not always match directly (UH1 6-100 is ISO VG 100; SHC Cibus 32 is ISO VG 32). Verify the correct viscosity grade for your application and check for any OEM-specific approvals before substituting.