TAYEE JD50A-L01Y024 — 50mm Yellow Industrial Signal Lamp, AC/DC 24V Steady LED Indicator

TAYEE · JD50A Series · Panel Indicator · 24V AC/DC · Steady Yellow · In stock

The TAYEE JD50A-L01Y024 is a 50 mm panel-mount LED signal lamp from TAYEE (Shanghai Tiane) designed for steady yellow status indication on industrial control panels, machine consoles, and operator HMIs. Operating directly from 24V AC or DC control power, it wires in parallel with the discrete output of any factory automation PLC to give operators a long-distance, daylight-readable visual cue of machine state — running, warning, attention required, or fault.

Where a flashing beacon would be too aggressive for a routine "process running" feedback channel, the JD50A-L01Y024 provides the steady-burn alternative used in machine status tower lights, panel door status, warning / fault indicators, and operator call stations across assembly lines, packaging machinery, water treatment skids, and conveyor cells. KOEED stocks the JD50A series alongside the 9-brand PLC and I/O ecosystem that drives them.

Key Specifications

Datasheet Highlights

• Model code decoder — L01Y024: L = LED light source, 01 = steady (non-flashing) operating mode, Y = yellow lens, 024 = 24V AC/DC operating voltage. The family uses the same suffix convention for red (R), green (G), blue (B) and white (W) lenses, and a separate L02 / L03 suffix range covers flashing and rotating variants.
• Universal 24V AC/DC input: the same unit runs from a 24V DC control supply (typical PLC output module rail) or 24V AC (older relay logic cabinets), eliminating the need to stock a different indicator part number per cabinet type.
• Direct PLC discrete output drive: the lamp draws a low LED-class current and is wired in parallel with a 24V digital output, so it can be energized directly by the dry-contact or transistor output of any of the KOEED-covered PLC families (see the Related Modules & Cross-Reference section).
• Panel-mount form factor: 50 mm cut-out, rear-clamp fixing, IP54 splash-resistant front face when gasketed — suits factory floor panels, machine consoles, and outdoor control kiosks.
• Long-life LED: rated for continuous panel duty, far outlasting the incandescent bulbs used in older JD series warning lights — drop-in upgrade path for legacy JD50 cabinets still in service.

Typical Applications

• Control panel status indication on PLC-driven assembly, packaging and bottling lines
• Yellow tier of a machine status tower light (red / yellow / green stack) signalling "machine running — no faults, no operator action required" or "warning / attention"
• Fault / warning indicator inside a control cabinet door, driven by a PLC discrete output or safety relay contact
• Operator call light at a workstation, energized when the PLC sees a part-present, cycle-complete or service-due condition
• Water-treatment skid, HVAC plant room, and pump station status panels where 24V control power is already available
• Replacement / upgrade of legacy incandescent JD50A pilot lamps in older Chinese-built control panels
• Mobile equipment, AGV charging stations, and conveyor cell status beacons (paired with a stack-light base for tier indication)

Related Modules & Cross-Reference

The JD50A-L01Y024 is a passive 24V indicator — it does not source or sink a control signal on its own. The tables below map it to the discrete I/O modules and CPU families across the nine brands KOEED covers, so you can size a complete indicator channel on a single BOM and ship it with your panel build.

Additional brands we pair with the JD50A-L01Y024 on panel builds: the Panasonic FP0R-C32CT and FP-X C30R transistor outputs, and the KEYENCE CV-5000 / XG-8000 vision-system DO banks — both can energize the lamp directly from a 24V DC output on vision-reject or inspection-complete signal lines.

Warranty & Authenticity

• Sourced from TAYEE authorized channels — every JD50A-L01Y024 ships in original TAYEE packaging with batch code, and is visually inspected for lens integrity, terminal tightness, and LED illumination before dispatch.
• Worldwide shipping with tracking — DHL / FedEx / UPS supported to North America, Europe, the Middle East, Southeast Asia and South America; typical transit 3–7 business days from the Shenzhen / Hong Kong warehouse.
• Tested before shipment — each unit is energized at 24V DC to confirm steady yellow illumination, lens color, and that the LED array meets the rated brightness spec.
• Quote within 24 hours — send your BOM (including the JD50A series indicator plus the PLC, discrete I/O, stack-light base, and any panel accessories) to Moritta@KOEED.COM and the KOEED desk will return availability and pricing for the whole lot.