KLÜBER to Shell Grease Cross Reference Guide

KLÜBER to Shell Grease Cross Reference — it's not the most glamorous subject in industrial maintenance, but it's one of the most consequential. Whether you're managing a single production line or an entire plant, the decisions you make here directly affect equipment life, energy consumption, and maintenance costs.

TL;DR

  • Understand klüber to shell grease cross reference — and why it matters for equipment reliability
  • Know the key differences in cross reference table
  • Apply the right important disclaimer for your operating conditions

KLÜBER to Shell Grease Cross Reference

This cross reference provides guidance for finding Shell equivalents to commonly specified KLÜBER industrial greases. Important disclaimer: These are suggested equivalents based on application similarities. Always verify technical compatibility before substituting lubricants.

Cross Reference Table

KLÜBER Product Potential Shell Equivalent Compatibility Level
Kluberspeed BF 72-22 Shell Gadus S2 V220 Alternative — verify speed rating
Staburags NBU 8 EP Shell Gadus S3 V220C Possible replacement — different EP package
Kluberplex BEM 41-132 Shell Gadus S2 V220 Similar application — both lithium greases
ISOFLEX LDS 18 Shell Gadus S5 V100 Alternative — both synthetic; verify NLGI (National Lubricating Grease Institute, a standardized measure of grease consistency from 000 to 6) and speed
Klubersynth UH1 6-100 Shell Naturelle HF-E 32 Similar NSF H1 — different base oil (PAO (polyalphaolefin, a synthetic hydrocarbon base oil with excellent thermal and oxidation stability) vs ester)
PETAMO GHY 441 Shell Gadus S3 V460D Similar application — verify temperature range

Note

NSF H1 registration means the lubricant is approved for incidental food contact — up to 10 ppm contamination. However, H1 does NOT mean the product is edible or safe for direct consumption. Always follow your facility's HACCP plan and GMP procedures.

Important Disclaimer

This cross reference is provided for informational purposes only. Users should verify technical compatibility before substitution. Contact KOEED at Moritta@KOEED.COM for technical assistance.

Need Technical Support for KLÜBER to Shell Grease Cross Reference?

Send your BOM or product inquiry to Moritta@KOEED.COM. Datasheets, availability, and pricing within 24 hours. Worldwide shipping on genuine KLUBER products.

Send My Inquiry →

Related Technical Guides

Related Articles

Retour au blog