CXG-392A Anti-static Vacuum Pick-up Station with Suction Pen

CXG-392A Anti-static Vacuum Pick-up Station

The CXG-392A Anti-static Vacuum Pick-up Station is a precision benchtop system designed for the safe, efficient, and damage-free handling of delicate electronic components. Utilizing a built-in diaphragm vacuum pump, it provides reliable suction to lift Surface Mount Devices (SMDs), bare dies, optical lenses, and micro-mechanical parts without the risk of mechanical pinching associated with traditional tweezers.

Engineered specifically for sensitive environments, the entire station—including the housing, suction pen, and interchangeable silicone pads—is strictly ESD-Safe (Electrostatic Discharge Safe). This ensures that static-sensitive components, such as CMOS sensors and delicate ICs (BGA, QFP), are protected from lethal voltage spikes during the pick-and-place or rework process.

Detailed Technical Specifications

Industrial Applications & Operational Advantages

The CXG-392A is an indispensable tool for SMT rework stations, cleanroom assembly lines, and electronics testing laboratories.

• BGA & QFP Rework: Effortlessly lift large, multi-pin ICs off the PCB immediately after hot-air desoldering. The heat-resistant silicone pads can withstand brief contact with hot components without melting.
• Optical & Jewelry Assembly: The vacuum method leaves absolutely no scratches, fingerprints, or mechanical stress marks on delicate glass lenses, optical filters, or polished watch components.
• Ergonomic Productivity: Prevents hand fatigue. The operator simply touches the pad to the component and covers the pen's bypass hole with their index finger to engage the vacuum, ensuring rapid and precise placement.

Maintenance & Troubleshooting FAQ

1. The pump is running, but the suction force is extremely weak or non-existent.
A loss of suction is rarely a pump failure. Systematically check for air leaks: First, ensure your finger is completely covering the bypass hole on the pen. Second, inspect the black silicone vacuum hose for cracks or loose connections at the base station and the pen. Finally, check the silicone suction pad; if it is torn, deformed, or stiff from age, it cannot form a vacuum seal and must be replaced.

2. Can I use the vacuum pen to suck up liquid flux or solder paste?
Absolutely not. The CXG-392A is designed for dry, solid objects only. Ingesting liquids, wet flux, or loose solder balls into the nozzle will bypass the filter, enter the internal diaphragm pump, and cause irreversible damage or severe clogs. Always ensure the component and PCB are dry before picking.

3. How do I verify the ESD-Safe integrity of the station?
To maintain ESD safety, the station must be plugged into a properly grounded AC outlet. You can use a multimeter to measure the resistance between the tip of the conductive silicone pad and the grounding pin of the power plug. It should read within the static-dissipative range (typically $10^5$ to $10^9$ Ohms). If it reads open-circuit (OL), the grounding wire inside the hose or housing may be broken.