GE Fanuc IC693ALG390 Series 90-30 Analog Output Module: Complete Technical Guide
GE Fanuc IC693ALG390 Series 90-30 Analog Output Module
Professional-grade 2-channel analog voltage output module for industrial automation applications
Product Overview
The GE Fanuc IC693ALG390 is a high-performance 2-channel analog voltage output module specifically designed for the Series 90-30 Programmable Logic Controller (PLC) system. This industrial-grade module provides precise analog control signals for a wide range of industrial automation applications, from process control to manufacturing automation.
For immediate purchase of this reliable module with expedited shipping, visit our official product page: GE Fanuc IC693ALG390 Analog Output Module.
Product Images
Key Features and Specifications
Core Features
- 2 Independent Channels: Each channel operates independently with precise voltage control
- High Resolution: 12-bit binary plus sign resolution (13-bit total) providing 2.5mV per count precision
- Wide Voltage Range: -10V to +10VDC output range for versatile applications
- Fast Update Rate: 5ms update time for both channels (application dependent)
- Factory Calibrated: Pre-calibrated for immediate use without additional setup
- Robust Design: Industrial-grade construction for harsh environments
Technical Specifications Table
| Parameter | Specification | Details |
|---|---|---|
| Model Number | IC693ALG390 | GE Fanuc Series 90-30 |
| Output Channels | 2 Channels | Independent voltage outputs |
| Voltage Range | -10V to +10VDC | Bipolar voltage output |
| Resolution | 12-bit + sign (13-bit total) | 2.5mV per Least Significant Bit (LSB) |
| Update Rate | 5ms (approximate) | Application dependent, determined by I/O scan time |
| Supply Voltage | +24VDC nominal | From isolated +24VDC on backplane or external source |
| External Supply Range | 18-30VDC | With 10% ripple tolerance |
| Backplane Power | +5VDC | From PLC backplane |
| Calibration | Factory calibrated | Ready for immediate installation |
| Compatibility | Series 90-30 PLC | GE Fanuc/Emerson automation platform |
For detailed technical documentation and datasheets, refer to the official GE Fanuc documentation. You can purchase this module directly from our store: IC693ALG390 Analog Output Module.
Industrial Applications
Primary Application Areas
- Process Control Systems: Precise control of valves, actuators, and proportional devices
- Motor Speed Control: Variable frequency drive (VFD) control signals
- Temperature Control: Analog control signals for heating elements and cooling systems
- Pressure Regulation: Control of proportional pressure valves in hydraulic systems
- Position Control: Servo motor control and positioning systems
- Flow Control: Proportional flow valve control in fluid systems
- Test and Measurement: Precision analog signal generation for testing equipment
System Integration
The IC693ALG390 module integrates seamlessly with the GE Fanuc Series 90-30 PLC platform, providing:
- Direct backplane mounting with secure connections
- Compatibility with existing Series 90-30 I/O racks
- Standard field wiring connections for industrial installations
- LED status indicators for channel operation monitoring
- Standard programming interface through ladder logic or other PLC programming languages
Installation and Configuration
Installation Guidelines
- Power Down: Ensure the PLC system is powered down before installation
- Module Insertion: Insert the module into an available slot in the Series 90-30 I/O rack
- Secure Connection: Ensure the module is firmly seated and secured in the rack
- Field Wiring: Connect field wiring to the terminal block according to the wiring diagram
- Power Up: Apply power to the PLC system and verify module status LEDs
- Configuration: Configure the module parameters in the PLC programming software
Wiring Considerations
The module requires proper field wiring for optimal performance:
- Use shielded twisted-pair cables for analog signals
- Properly ground the shield at one end only
- Maintain separation from high-voltage power cables
- Follow local electrical codes and regulations
- Use appropriate wire gauges for the application
Ready to upgrade your automation system? Get your GE Fanuc IC693ALG390 module with expedited shipping today.
Performance Comparison
| Feature | IC693ALG390 | Standard Analog Modules | Advantage |
|---|---|---|---|
| Resolution | 2.5mV (13-bit) | 10-20mV (8-10 bit) | 4-8x higher precision |
| Update Rate | 5ms | 10-20ms | 2-4x faster response |
| Voltage Range | -10V to +10V | 0-10V or 4-20mA | Bipolar operation capability |
| Channels | 2 Independent | 1-2 Shared | True independent operation |
| Calibration | Factory calibrated | Field calibration required | Ready to use immediately |
Frequently Asked Questions (FAQ)
Trust Metrics and Industry Recognition
External Citations and References
Technical specifications verified against official GE Fanuc documentation and industry sources including:
- GE Fanuc Series 90-30 I/O Module Specifications (GFK-0898F)
- Industrial Automation Co. technical documentation
- Qualitrol technical support resources
- PDF Supply automation database
- ArtisanTG embedded systems specifications
Conclusion
The GE Fanuc IC693ALG390 analog output module represents a reliable, high-performance solution for industrial automation applications requiring precise analog voltage control. With its 2-channel design, high resolution, and robust industrial construction, this module continues to be a trusted component in Series 90-30 PLC systems worldwide.
For immediate availability and expedited shipping of this essential industrial automation component, visit our product page: GE Fanuc IC693ALG390 Analog Output Module.
Purchase Now with Expedited Shipping
