Delta DVP08XN211R Expansion Output Module: Comprehensive Guide for Industrial Automation

2026년 1월 21일

Historical parts record: Photos and notes below belong to this record. Confirm the offered unit’s full model, condition and available test evidence before ordering.

What is the Delta DVP08XN211R?

The DVP08XN211R is a Delta 8-point relay-output expansion module for the DVP slim PLC family — the right-side extension that adds eight relay outputs (Y0–Y7, split across the C0 and C1 commons) to a DVP CPU, powered from 24 VDC at a maximum of 1.2 W. The face carries the identification in Delta's shorthand: 08XN2, 8DO, and the R badge for relay, with a POWER LED and eight OUT status LEDs; the rear label states the ratings — OUTPUT MODULE 2.0 A per point at 250 VAC resistive load, cULus Listed 70HF IND. CONT. EQ., CE — over the Delta Electronics name and MADE IN CHINA. The module clips to the DIN rail on DINKLE SE5D terminal blocks, takes the 6-pin removable plugs on both output sides, and links to the CPU through the EXTENSION PORT connector under the top cover. This record covers three factory-new units — serials 08XN211RW15510030, 15510099 and 15510135, each in its Delta box labelled 可编程序控制器配件 — intake recorded 20 January 2026, record weight 0.5 kg. Nine photos and two inspection videos document the modules from both terminal sides, the rear label and the packaging.

3 min readContent reviewed 8 October 2026

Part details

DVP08XN211R, as read from the face and rear label
Field	Value
Brand / family	Delta Electronics DVP slim-series expansion, type DVP08XN211R
Outputs	8 relay outputs (R badge): Y0–Y3 on common C0, Y4–Y7 on common C1
Output rating	2.0 A per point at 250 VAC, 60/60 Hz, resistive load (label figure)
Power input	24 VDC, 1.2 W maximum (label figure)
Status	POWER LED + OUT LEDs 0–7 on the face
Connection	6-pin removable terminal plugs per side (DINKLE SE5D); EXTENSION PORT to the CPU; DIN-rail clip
Approvals	cULus Listed 70HF IND. CONT. EQ., CE (N136)
Serials	08XN211RW15510030 / 15510099 / 15510135 — three units, Made in China
Condition	New, boxed (可编程序控制器配件); intake 2026-01-20, record weight 0.5 kg

Scroll sideways to see the full table.

Values are read from the face print and the rear label; the common split (C0/C1) follows the terminal markings.

The eight points a machine always seems to need

Every slim-PLC project hits the same wall — the CPU's built-in outputs are committed, and the machine still has eight solenoids, stack lights or indicator banks left. The DVP08XN211R is Delta's answer: eight relay points in a two-finger-wide module that snaps onto the DIN rail beside the CPU and connects through the extension port, no wiring harness between them. The relay output is the practical choice for mixed loads — 2 A per point at 250 VAC covers contactor coils, valves and lamps without solid-state derating worries, and the two-common split (C0 for Y0–Y3, C1 for Y4–Y7) lets one module serve two voltage groups. The removable 6-pin plugs mean the panel can be pre-wired and the module clicked in at commissioning; the eight OUT LEDs show state per point from across the cabinet.

The three units here are consecutive Delta production — serials 15510030, 15510099 and 15510135 — each boxed with the Chinese-labelling accessory marking and photographed from both terminal sides, rear label and the bottom DIN clip. For a panel shop stocking the DVP family, three same-type modules cover a three-station build or one live spare plus two for the next project.

Photos and video

All images below are original KOEED warehouse photos. Click any photo to view it full size.

C0 side terminals — The C0 side: the C0 / Y0 / Y1 / Y2 / Y3 / NC terminal legend, the 6-pin removable plug seated, POWER and OUT 0–3 LEDs above — with the 08XN2 8DO print and the R badge.

C1 side terminals — The C1 side: C1 / Y4 / Y5 / Y6 / Y7 / NC with its own 6-pin plug — the second common group of the eight relay points.

DIN clip — The underside: the white DIN-rail clip and the extension-port cover — the two latches that seat the module to rail and CPU.

Extension port — The top cover opened: the EXTENSION PORT connector — the bus pins that link the module to the CPU.

Rear label — The rear label in full: MODEL DVP08XN211R, POWER INPUT 24Vdc 1.2W MAX, OUTPUT MODULE 2.0A 250Vac 60/60Hz RES LOAD — cULus LISTED 70HF IND. CONT. EQ., CE N136, S/N 08XN211RW15510030, DELTA ELECTRONICS, INC., MADE IN CHINA — over the DINKLE SE5D terminal blocks.

Front face full — The front face in full: both terminal legends (C0/Y0–Y3 and C1/Y4–Y7), the POWER LED, the OUT 0–7 LED array, the 08XN2 8DO print and the R relay badge.

Rear with bus pins — The rear at angle: the extension bus pins on the upper module — how two modules cascade on one CPU.

Inspection video 1, recorded at the Koeed warehouse before dispatch.

Three modules — The three modules side by side: identical faces, the third unboxed showing the extension port — the complete intake.

Three boxes — The three Delta boxes: Model DVP08XN211R labels with QR codes and serials 08XN211RW15510099, 15510135 and 15510030 — 可编程序控制器配件, MADE IN CHINA.

Inspection video 2, recorded at the Koeed warehouse before dispatch.

For the CPU-side counterpart from the same shelf, see the Omron CP1L-M60DR-D CPU — the compact controller class this module family competes against, documented the same way.