ERBE 20194-080 Negative Plate Connection Cable

ERBE · Medical Cable · 20194-080 · Electrosurgical Return

What Is the ERBE 20194-080 Connection Cable?

The ERBE 20194-080 is a negative plate (return electrode) connection cable used with ERBE electrosurgical generators. It connects the patient return electrode (neutral electrode / grounding pad) to the electrosurgical unit, completing the RF current path during monopolar electrosurgery procedures. ERBE is a leading manufacturer of medical electrosurgical equipment used in operating rooms worldwide.

In short: An ERBE electrosurgical return electrode cable (part 20194-080) — connects the patient grounding pad to the ERBE generator for safe RF current return during monopolar surgical procedures.

Key Features

1. Genuine ERBE Medical-Grade Cable

What it means: Manufactured to medical device standards with biocompatible insulation and high-reliability connectors.
Why it matters: The return electrode path carries the full RF surgical current — a cable failure during surgery risks patient burns at alternative grounding points.
Result: Reliable connection meeting medical electrical safety standards (IEC 60601).

2. ERBE Generator Compatibility

What it means: Connector keyed for ERBE electrosurgical units — ICC, VIO, and APC series generators.
Why it matters: Non-ERBE cables may not mate correctly or may lack the contact quality monitoring (CQM) pin configuration that ERBE generators use to verify electrode contact.
Result: Proper integration with ERBE generator safety monitoring systems.

3. Flexible, Autoclavable Construction

What it means: Cable jacket material suitable for repeated sterilization or high-level disinfection per hospital protocols.
Why it matters: Operating room cables must withstand frequent cleaning and sterilization without degradation.
Result: Long service life in the demanding OR reprocessing environment.

Key Specifications

Frequently Asked Questions

"What ERBE generators is this cable compatible with?"

This cable is designed for ERBE ICC, VIO, and APC series electrosurgical generators. Verify the connector type on your specific ERBE unit — the negative plate / return electrode socket is clearly labeled on the generator front panel. Do not force-fit into sockets not designed for this connector type.

"How often should return electrode cables be replaced?"

Inspect the cable before each use per hospital biomedical engineering protocols. Look for cuts, kinks, exposed conductors, cracked connector bodies, or intermittent continuity when flexed. Replace immediately if any damage is found. Proactive replacement intervals are typically defined by the hospital biomedical engineering department based on usage frequency.

"Is this cable compatible with non-ERBE electrosurgical generators?"

No. Medical device connectors are manufacturer-specific and not standardized across brands. An ERBE return electrode cable will only connect to ERBE generators. Using adapters or modified connectors on medical equipment violates regulatory compliance and creates patient safety risks.

koeed.com — Your Trusted PLC Supplier. Industrial electronics, automation components, and specialty parts. Worldwide shipping with 24-hour quote turnaround at Moritta@KOEED.COM.