Bernstein ENK-SU1Z Limit Switch - 1PCS IW 608.1152.007

Home · Safety Components · Limit Switches · Bernstein ENK-SU1Z

What Is the Bernstein ENK-SU1Z Limit Switch?

In short: The Bernstein ENK-SU1Z (IW 608.1152.007) is a safety-rated limit switch engineered for machine guarding, end-of-travel detection, and position sensing in industrial automation systems where mechanical actuation provides a hard-wired, fail-safe signal path independent of programmable logic.

In a world increasingly reliant on software-defined safety, the humble limit switch remains the most trusted hard-stop verification device on the factory floor. Bernstein, a German manufacturer known for enclosures and industrial switching technology, builds the ENK-SU1Z with a die-cast metal housing that shrugs off impacts, coolant spray, and the general abuse that accompanies life next to a moving machine slide or guard door. The positive-break contact mechanism ensures that even if the contacts weld, the actuator's mechanical force physically separates them — a critical safety feature that software alone cannot replicate.

This particular unit is the ENK-SU1Z variant with the IW 608.1152.007 part designation. It is sold as 1 piece, new condition. Typical applications include confirming that a protective door is fully closed before a cycle starts, detecting the home position of a linear slide, or acting as an overtravel cutout on a gantry axis. The compact body allows mounting in tight machine frames where larger switch bodies would interfere with moving members.

When integrating this switch into a safety circuit, note the contact configuration and ensure it aligns with your safety relay's input channel requirements. Our applications engineers can review your wiring diagram to verify the switch's normally-closed and normally-open contact arrangement matches your intended use.

Technical Specifications

Frequently Asked Questions

Can I wire this limit switch directly into a safety relay?

Yes, the ENK-SU1Z is designed for safety circuits. The critical step is identifying which terminals correspond to the normally-closed (NC) positive-break contacts — these are the ones that must open when the actuator is triggered. Safety relays typically require dual-channel NC inputs, so confirm your switch has two independent NC contacts if your safety relay demands redundancy. A multimeter continuity test across the terminal pairs with the actuator in both free and depressed positions will map the contact arrangement.

What does positive-break mean and why does it matter?

Positive-break (also called forced-opening) means the actuator mechanism is mechanically linked to the contacts such that welding cannot prevent them from separating. In a conventional relay or switch, welded contacts may stay closed even when the coil de-energizes or the plunger is pushed. A positive-break switch uses rigid, non-resilient linkage so that pressing the actuator physically tears the contacts apart regardless of any weld. This is a mandatory feature for safety-rated limit switches under ISO 14119 and IEC 60947-5-1.

What is the difference between this ENK-SU1Z and a standard microswitch?

Microswitches (like the common V3 or Z-series) are designed for light-duty signal switching in appliances and office equipment — they lack the mechanical robustness, positive-break construction, and environmental sealing required for industrial machine safety. The Bernstein ENK-SU1Z uses a die-cast metal body, silicone-sealed actuator boot, and heavy-duty contact materials rated for millions of mechanical cycles under industrial loads. Using a consumer-grade microswitch in a safety function violates machinery safety standards and creates a serious operator hazard.

Does this switch come with a mounting bracket?

The ENK-SU1Z body typically includes integral mounting holes or slots for direct attachment to a machine frame. If your installation requires an adjustable bracket or a specific actuator lever style (roller plunger, rod lever, whisker, etc.), confirm these details against the product images or contact us to verify what is included. Additional actuator heads for the ENK series are often interchangeable and can be sourced separately.

© KOEED. Industrial automation parts supplier. koeed.com