Zhitai TiPlus7100 1TB NVMe SSD — PCIe 4.0 M.2 2280 Boot Drive

Zhitai (YMTC) · TiPlus7100 · M.2 2280 · In stock

The Zhitai TiPlus7100 1TB is a consumer-grade PCIe 4.0 x4 M.2 NVMe SSD built by Zhitai, the consumer brand of Yangtze Memory Technologies (YMTC). It delivers up to 7000 MB/s sequential read and 6000 MB/s sequential write on the standard M.2 2280 footprint, making it a strong fit for industrial PC builds whose host controller, BIOS, and operating system are the same ones that run Allen-Bradley, Siemens, Mitsubishi, Omron, Fanuc, Schneider, Yaskawa, Panasonic, and KEYENCE runtime software. It is a mainstream component rather than a true industrial-grade SSD, and KOEED sources it as part of a broader industrial-PC and adjacent-components basket.

Use this page if you are building or refreshing the host machine — an industrial PC, edge gateway, HMI panel-PC, or engineering workstation — that runs PLC programming tools such as Studio 5000, TIA Portal, GX Works, CX-One, or WinCC. Need a quotation or matching heatsink and M.2 mounting kit? Email Moritta@KOEED.COM.

Key Technical Specifications & Overview

The TiPlus7100 uses YMTC’s 128-layer TLC 3D NAND and a DRAM-less controller with Host Memory Buffer (HMB) support, which keeps the bill of materials low while still reaching PCIe 4.0 x4 throughput. The 1TB SKU provides roughly 2400 TBW endurance and a 5-year manufacturer warranty when installed in a host with adequate airflow. A single-sided M.2 2280 (22 mm × 80 mm) layout means it fits almost every PanelView, Magelis, GOT, and SIMATIC IPC that ships with an M.2 slot.

Application Scenarios & Where It Fits

The TiPlus7100 sits between a SATA SSD and a high-end PCIe 4.0 drive, so it works well anywhere a modern industrial host needs fast boot and program load times without paying for a flagship SKU. The list below is the typical deployment we see when customers pair this drive with KOEED-sourced Allen-Bradley controllers or Siemens SIMATIC panels.

• Industrial PC (IPC) boot drive — x86 Panel-PCs hosting Studio 5000, TIA Portal, GX Works3, CX-One, or WinCC engineering software. Pairs naturally with SIMATIC, PanelView, GOT, and Magelis HMI panel-PC chassis that expose a single M.2 2280 slot.
• Edge gateway & SCADA node — small-form-factor boxes running Modbus / OPC UA / MQTT bridging, where the OS image plus 1 TB of historical tag logging stays on a single low-cost NVMe drive.
• Vision inspection workstation — workstations attached to KEYENCE CV-5000 / XG-8000 cameras or Fanuc iRVision cells; the 7000 MB/s read keeps inspection image buffers streaming without dropped frames.
• Engineering & programming workstation — laptops and desktops used to offline-program Mitsubishi MELSEC, Omron SYSMAC, and Panasonic FP PLCs.
• Robotics teach pendant & offline simulator host — drives for Yaskawa Motoman, Fanuc ROBOGUIDE, and ABB offline cells, where the 1 TB capacity fits both the OS and the full robot program library.
• Lab & training rig — cost-effective storage for Schneider Modicon M340/M580 labs, Yaskawa MP controller benches, and PLC training classrooms.

Note: this is a consumer-grade drive rated 0 °C to 70 °C. For control cabinets above 70 °C ambient, or for shock / vibration heavy mobile equipment, ask us about true industrial-grade NVMe alternatives via Moritta@KOEED.COM.

Integration & Wiring Notes

The TiPlus7100 uses the standard M.2 M-Key edge connector and draws both power and data through the socket — no separate power cabling is required beyond what the host board already supplies. A few practical points for an industrial PC build:

• Slot compatibility — the drive works in any M.2 2280 M-Key slot that supports PCIe x4. On older motherboards with only PCIe 3.0, the drive negotiates down automatically (roughly 3500 MB/s read).
• Heatsink & airflow — sustained writes can drive the controller into thermal throttling. Attach the supplied graphene label-side pad or a low-profile M.2 heatsink and keep chassis airflow positive.
• BIOS settings — enable “Above 4G Decoding” and “NVMe” as the boot device. Disable CSM/Legacy if the OS image is UEFI-only (Windows 10/11 IoT, Windows Server, Ubuntu LTS).
• Power budget — peak draw is around 5 W during sequential write. Make sure the panel-PC or workstation 12 V rail can deliver the headroom, especially with a CompactLogix or SIMATIC backplane also drawing through the same PSU.
• Secure erase & disposal — the drive supports NVMe Format / Secure Erase. If the IPC is redeployed to a new line (or shipped back for RMA), wipe the namespace before it leaves the cabinet.

For host platforms that lack a free M.2 slot, we also stock M.2-to-PCIe adapter cards that drop into a standard x4 slot on Advantech, Siemens, and Kontron IPC motherboards. Ask about the adapter bundle in your next quote email.

Installation & Commissioning Tips

Mounting the drive is a single M.2 standoff screw; the work happens in the OS. The sequence below is what we use when commissioning an industrial host that will run PLC programming software.

1. Insert the drive at a 30° angle into the M.2 slot and press flat. Tighten the standoff screw to roughly 0.4 N·m — do not over-torque on a panel-PC chassis.
2. Boot the host, enter BIOS, confirm the NVMe is detected, set it as the first boot device, then save and exit.
3. Install the OS (Windows 10/11 IoT LTSC, Windows Server, or Ubuntu 22.04 LTS are the common picks). Partition as GPT, align to 4 KB, and leave 10–15% of the drive unpartitioned for over-provisioning.
4. Install the engineering toolchain you actually use — Studio 5000, TIA Portal, GX Works3, CX-One, EcoStruxure, or MotionWorks. Storing the project library on the same NVMe keeps compile times low.
5. Enable scheduled TRIM and verify SMART data using the KOEED AI Diagnostic Tool or any NVMe-aware utility. We log the baseline SMART counters so a future warranty claim has a reference.
6. Image the clean, configured drive with a sector-level tool (Clonezilla, Macrium, or vendor Acronis) and store the image on a NAS. Recovery time after a corrupted OS shrinks from hours to minutes.
7. If the host runs 24/7 (which most industrial PCs do), enable Windows Update maintenance windows and configure BitLocker / LUKS before the unit leaves the bench.

For PLC error-code lookups and Modbus sanity checks during commissioning, try the free PLC Error Code Database and the Modbus CRC Calculator in the KOEED toolset.

Procurement, Warranty & Lead Time

KOEED sources the Zhitai TiPlus7100 1TB as a retail-channel, factory-sealed unit through our Shenzhen + Hong Kong dual-base China Sourcing operation, then ships worldwide via DHL / FedEx / UPS. Each unit is supplied in original retail packaging with a verifiable serial number; the manufacturer’s 5-year limited warranty applies through the official Zhitai service channel.

• Lead time — small lots (1–20 pcs) typically ship from Shenzhen stock within 2–3 business days after payment clears. Larger build quantities are quoted against a fresh batch from the manufacturer.
• Warranty — 5-year limited manufacturer warranty on the SSD, honoured through Zhitai’s official RMA channel. KOEED assists with the cross-border RMA paperwork at no charge.
• Authenticity — every unit is factory-sealed retail packaging; KOEED does not refurbish, re-mark, or relabel storage components. SMART counters are verified before shipment.
• Bundling — pair the drive with an M.2 heatsink, a low-profile adapter card, or a matched DDR4 / DDR5 SO-DIMM kit in a single BOM. Send the full list when you request a quote.
• Payment & shipping — standard B2B terms apply; see the Shipping Policy and the Return Policy pages for the latest transit times and DOA handling.
• Adjacent sourcing — this drive ships alongside Allen-Bradley ControlLogix, Siemens SIMATIC, Mitsubishi MELSEC, Omron SYSMAC, Fanuc servo, Schneider Modicon, Yaskawa MP, Panasonic FP, and KEYENCE vision parts in the same KOEED basket — one BOM, one shipment.