Tonometer Probes TA01I — 100/Box Disposable Ophthalmic Tip Covers

Tono-Pen Compatible · Latex-Free Silicone · Single-Use · In Stock

The TA01I Tonometer Probes are single-use disposable latex-free silicone tip covers designed for handheld tonometers used in ophthalmic intraocular pressure (IOP) screening. Each box contains 100 individually dispensed probe covers, providing a clean, hygienic barrier between the device and the patient during routine eye exams.

These probes are most commonly fitted to the Reichert Tono-Pen AVIA and Tono-Pen XL handhelds, and they are cross-compatible with several Medtronic, Bio-Rad and Accutome handheld tonometer bodies used in clinical optometry, veterinary ophthalmology and hospital eye departments. KOEED lists this item as a cross-category spare — our core catalogue remains industrial automation modules from Allen-Bradley, Siemens, Mitsubishi, Omron, Fanuc, Schneider, Yaskawa, Panasonic and KEYENCE, but we also extend the same BOM-style RFQ workflow to clinical engineering, lab instrumentation and adjacent medical consumables for buyers who already manage mixed-cabinet purchasing. Send a one-line RFQ to Moritta@KOEED.COM and we will confirm stock, lot, expiry and shipping options within 24 hours.

Key Technical Specifications

Application Scenarios & Where It Fits

The TA01I is a routine consumable in any clinical environment that performs handheld tonometry. It is engineered for the KOEED cross-category spares catalogue, which means buyers managing mixed procurement — industrial PLC racks plus adjacent clinical, lab or instrumentation consumables — can place a single RFQ for both lines.

• Hospital ophthalmology departments running high-volume IOP screening clinics
• Independent optometry practices using Reichert Tono-Pen AVIA or Tono-Pen XL handhelds
• Veterinary ophthalmology clinics performing glaucoma screening on companion animals
• Mobile eye-care units and outreach screening programmes (single-use sterile barrier per patient)
• Clinical engineering and biomedical procurement teams that also manage industrial automation spares (Allen-Bradley, Siemens, Mitsubishi, Omron, Fanuc, Schneider, Yaskawa, Panasonic, KEYENCE) and prefer one consolidated vendor
• Research and teaching labs that require a latex-free, single-patient barrier for tonometer-based protocols

For buyers who need a full instrument list priced together, KOEED’s Create a Quote workflow accepts multi-line BOMs in a single submission, so a tonometry clinic can combine TA01I probes with the Allen-Bradley 1756-L73 ControlLogix processor or a Siemens SIMATIC 6ES7 315-2EH14 CPU on the same RFQ.

Integration & Compatibility Notes

The TA01I is a passive silicone sleeve, so it carries no electrical wiring of its own. “Integration” here means mechanical fit and sterilisation workflow on the host tonometer. The probe is designed to slip over the transducer tip of the host device and seat flush against the housing; no calibration is required after fitting.

If you are managing a fleet of clinical instruments alongside an industrial spare-parts cabinet, the KOEED China sourcing team can group the TA01I with PLC CPUs, HMI panels and servo amplifiers in one shipment. Use the AI Diagnostic Tool to confirm a tonometer model before ordering, or message Moritta@KOEED.COM with the host-device nameplate photo.

Installation & Commissioning Tips

1. Inspect the box seal. Confirm the dispenser box is sealed and within the labelled shelf life before fitting a probe to a host tonometer.
2. Power on and calibrate the host first. Run the Tono-Pen daily calibration check on a flat surface with no probe fitted, then power down before fitting the TA01I.
3. Slip-fit, do not force. Press the silicone probe straight over the transducer nose until it seats against the housing. Twisting or using tools can tear the silicone membrane.
4. Take a verification reading. After fitting, perform one air reading or one discard reading to confirm the probe is seated flush and the device still passes self-check.
5. One patient, one probe. Discard the TA01I immediately after the IOP reading; do not reuse across patients, even within the same clinic session.
6. Stock rotation. If you carry multiple boxes, practise FIFO rotation and keep unopened boxes sealed; humidity and direct sunlight will shorten the usable life of the silicone.
7. Document the lot number. Record box lot and expiry in your clinical consumables log so traceability audits run cleanly.

Engineers who are more familiar with commissioning a Mitsubishi MR-J4-100A servo amplifier or a Omron CP1E-N40DR-A CPU than a Tono-Pen will find the fitting logic identical: verify the host is healthy, fit the consumable, run a self-check, then go live. For deeper setup notes, the PLC Error Code Database and AI Diagnostic Tool cover the broader instrumentation side of the catalogue.

Procurement, Warranty & Lead Time

KOEED is an independent multi-brand sourcing company, not a manufacturer-owned subsidiary, and operates a quote-driven RFQ workflow rather than a fixed online price list. Final pricing for the TA01I is confirmed by email against current lot, quantity and destination.

• RFQ turnaround: 24 hours on business days; first availability and shipping options from Moritta@KOEED.COM.
• MOQ: One box (100 probes) for clinical buyers; volume tiers for hospital procurement, multi-clinic groups and OEM veterinary equipment packers.
• Lead time: Typically in stock for immediate dispatch; back-order windows depend on lot availability and are flagged in the quote.
• Shipping: Worldwide via DHL / FedEx / UPS; cold-chain is not required for this silicone consumable.
• Warranty & authenticity: Lot and expiry documented on the commercial invoice; faulty or short-dated stock is replaced or credited under the Return Policy.
• BOM consolidation: Mix the TA01I with Allen-Bradley, Siemens, Mitsubishi, Omron, Fanuc, Schneider, Yaskawa, Panasonic or KEYENCE spares in one RFQ through the Create a Quote form, or browse the full Brands index.
• Compliance: Buyers are responsible for confirming registration and import requirements for medical consumables in their destination country before purchase.

Cross-category consumable listing — core catalogue remains industrial automation spares. Final pricing, lot and shipping options are confirmed by email against Moritta@KOEED.COM. See About KOEED and Shipping Policy for full terms.