For Logitech G Pro Headset Blue Icepop Cardioid Condenser Microphone Replacement

Logitech · G Pro Headset · Microphone Replacement · Cardioid Condenser · In stock

What Is the Logitech G Pro Headset Microphone Replacement?

The Blue Icepop cardioid condenser microphone replacement is a drop-in replacement boom microphone designed for the Logitech G Pro gaming headset. It uses a cardioid polar pattern — meaning it primarily captures sound from the front while rejecting noise from the sides and rear — which is the standard choice for voice communication in noisy environments. This replacement module is compatible with the G Pro headset's microphone port and can be swapped in without soldering or modification.

In short: If your Logitech G Pro headset microphone has stopped working — muffled audio, no signal, or a physically broken boom arm — this replacement restores clear voice communication. It is a plug-and-play swap that takes less than a minute.

Common Signs Your Microphone Needs Replacement

1. Muffled or Distant Audio

What it sounds like: Your teammates report that your voice sounds far away, underwater, or heavily compressed even though you are speaking directly into the mic.
Likely cause: The condenser capsule has accumulated moisture or debris, or the electret element has degraded over time. Condenser microphones rely on a charged diaphragm — when this charge dissipates or the diaphragm is contaminated, sensitivity drops dramatically.
Quick test: Record a short clip in Windows Voice Recorder or Audacity. Compare the waveform amplitude to a known-good microphone recording at the same distance. If the replacement captures significantly more signal, the old capsule was failing.

2. Intermittent or No Signal

What it sounds like: Your microphone cuts in and out during use, or your system does not detect any audio input from the headset at all.
Likely cause: A broken wire inside the microphone boom arm — typically at the flex point where the boom meets the headset earcup, or at the connector plug. The repeated bending of positioning the boom eventually fatigues the internal conductors.
Quick test: While monitoring your microphone input level (in Windows Sound Settings), gently flex the boom arm along its length. If the input meter jumps or flickers at a particular flex point, the internal wire is broken at that location.

3. Physically Damaged Boom Arm

What you see: The boom arm is cracked, snapped, or no longer holds its position when bent. The flexible gooseneck section may have separated from the rigid connector housing.
Result: Even if the microphone element still functions electrically, a broken boom arm cannot be reliably positioned, and the internal wiring may be exposed or shorted. Replacement is the only practical fix.

Key Specifications

Frequently Asked Questions

Will this microphone work with my Logitech G Pro X headset or only the standard G Pro?

This microphone is designed for the standard Logitech G Pro headset. The G Pro X uses a different microphone connector and housing design. While both are from the same product family, the microphone modules are not cross-compatible. Check the connector shape on your headset — the G Pro uses a specific barrel-style plug. If you are unsure, send us a photo of your headset's microphone port and we will confirm compatibility.

How do I install the replacement microphone?

Remove the old microphone by gently pulling it straight out of the port on the left earcup — it is held in place by a friction-fit connector, not a locking mechanism. Align the new microphone's plug with the port and press it in firmly until it seats fully. No tools are required, and no software configuration changes are needed. After installation, test the microphone in your operating system's sound settings to confirm it is detected and recording.

Is this an original Logitech part?

This listing is a compatible replacement microphone manufactured to match the specifications of the original Logitech G Pro microphone module. It is designed to be electrically and mechanically compatible — same connector type, same polar pattern, same sensitivity range. The product label will identify the manufacturer. If you specifically require an OEM Logitech-branded replacement, please contact us to check availability.

Will replacing the microphone affect the headset's audio output (speakers)?

No. The microphone and the headphone drivers are independent circuits that share only the physical housing. Replacing the microphone module has no effect on the headset's speaker drivers, volume, or sound quality. If you are also experiencing problems with the headphone audio, the issue is elsewhere — most likely the main cable, the 3.5mm connector, or the drivers themselves.

koeed.com — Your Trusted PLC Supplier. Industrial automation components, electronic parts, and specialty supplies. Worldwide shipping with 24-hour quote turnaround at Moritta@KOEED.COM.